Linux中dd命令使用实例教程

时间:2021-05-19

本文主要给大家介绍了关于Linux中dd命令使用的相关内容,分享出来供大家参考学习,下面来看看详细的介绍:

一、Linux dd命令用指定大小的块拷贝一个文件,并在拷贝的同时进行指定的转换。

使用方法:dd [OPERAND]

参数注释:

bs=BYTES read and write BYTES bytes at a time (also see ibs=,obs=) cbs=BYTES convert BYTES bytes at a time conv=CONVS convert the file as per the comma separated symbol list count=N copy only N input blocks ibs=BYTES read BYTES bytes at a time (default: 512) if=FILE read from FILE instead of stdin(默认为标准输入) iflag=FLAGS read as per the comma separated symbol list obs=BYTES write BYTES bytes at a time (default: 512) of=FILE write to FILE instead of stdout(默认为标准输出) oflag=FLAGS write as per the comma separated symbol list seek=BLOCKS skip BLOCKS obs-sized blocks at start of output skip=BLOCKS skip BLOCKS ibs-sized blocks at start of input status=WHICH WHICH info to suppress outputting to stderr; 'noxfer' suppresses transfer stats, 'none' suppresses all

CONVS的可选参数

ascii from EBCDIC to ASCII ebcdic from ASCII to EBCDIC ibm from ASCII to alternate EBCDIC block pad newline-terminated records with spaces to cbs-size unblock replace trailing spaces in cbs-size records with newline lcase change upper case to lower case nocreat do not create the output file excl fail if the output file already exists notrunc do not truncate the output file ucase change lower case to upper case sparse try to seek rather than write the output for NUL input blocks swab swap every pair of input bytes noerror continue after read errors sync pad every input block with NULs to ibs-size; when used with block or unblock, pad with spaces rather than NULs fdatasync physically write output file data before finishing fsync likewise, but also write metadata

FLAGS的可选参数

append append mode (makes sense only for output; conv=notrunc suggested) direct use direct I/O for data directory fail unless a directory dsync use synchronized I/O for data sync likewise, but also for metadata fullblock accumulate full blocks of input (iflag only) nonblock use non-blocking I/O noatime do not update access time noctty do not assign controlling terminal from file nofollow do not follow symlinks count_bytes treat 'count=N' as a byte count (iflag only)

注意:指定数字的地方若以下列字符结尾,则乘以相应的数字:

c =1, w =2, b =512, kB =1000, K =1024, MB =1000*1000, M =1024*1024, xM =MGB =1000*1000*1000, G =1024*1024*1024, and so on for T, P, E, Z, Y

二、使用实例

1、将本地的/dev/hdb整盘备份到/dev/hdd

dd if=/dev/hdb of=/dev/hdd

2、将/dev/hdb全盘数据备份到指定路径的image文件

dd if=/dev/hdb of=/root/image

3、备份/dev/hdb全盘数据,并利用gzip工具进行压缩,保存到指定路径

dd if=/dev/hdb | gzip > /root/image.gz

4、把一个文件拆分为3个文件

#文件大小为2.3k[Oracle@rhel6 ~]$ ll db1_db_links.sql -rw-r--r-- 1 oracle oinstall 2344 Nov 21 10:39 db1_db_links.sql#把这个文件拆成每个文件1k,bs=1k,count=1,使用skip参数指定在输入文件中跳过多少个bs支读取[oracle@rhel6 ~]$ dd if=db1_db_links.sql of=dd01.sql bs=1k count=11+0 records in1+0 records out1024 bytes (1.0 kB) copied, 4.5536e-05 s, 22.5 MB/s[oracle@rhel6 ~]$ dd if=db1_db_links.sql of=dd02.sql bs=1k count=1 skip=11+0 records in1+0 records out1024 bytes (1.0 kB) copied, 0.000146387 s, 7.0 MB/s[oracle@rhel6 ~]$ dd if=db1_db_links.sql of=dd03.sql bs=1k count=1 skip=20+1 records in0+1 records out296 bytes (296 B) copied, 0.000204216 s, 1.4 MB/s#拆分出的文件[oracle@rhel6 ~]$ ll dd*sql-rw-r--r-- 1 oracle oinstall 1024 May 20 14:58 dd01.sql-rw-r--r-- 1 oracle oinstall 1024 May 20 14:58 dd02.sql-rw-r--r-- 1 oracle oinstall 296 May 20 14:58 dd03.sql

5、把拆分出的文件合并为1个

#合并操作,此时用到seek参数,用于指定在输入文件中跳过的bs数[oracle@rhel6 ~]$ dd of=1.sql if=dd01.sql 2+0 records in2+0 records out1024 bytes (1.0 kB) copied, 0.000176 s, 5.8 MB/s[oracle@rhel6 ~]$ dd of=1.sql if=dd02.sql bs=1k seek=11+0 records in1+0 records out1024 bytes (1.0 kB) copied, 0.000124038 s, 8.3 MB/s[oracle@rhel6 ~]$ dd of=1.sql if=dd03.sql bs=1k seek=20+1 records in0+1 records out296 bytes (296 B) copied, 0.00203881 s, 145 kB/s#与拆分前的文件进行校验[oracle@rhel6 ~]$ diff 1.sql db1_db_links.sql[oracle@rhel6 ~]$

6、在输出文件中指定的位置插入数据,而不截断输出文件

需要使用conv=notrunc参数

[oracle@rhel6 ~]$ dd if=2.sql of=1.sql bs=1k seek=1 count=2 conv=notrunc

总结

以上就是这篇文章的全部内容了,希望本文的内容对大家的学习或者工作能带来一定的帮助,如果有疑问大家可以留言交流,谢谢大家对的支持。

声明:本页内容来源网络,仅供用户参考;我单位不保证亦不表示资料全面及准确无误,也不保证亦不表示这些资料为最新信息,如因任何原因,本网内容或者用户因倚赖本网内容造成任何损失或损害,我单位将不会负任何法律责任。如涉及版权问题,请提交至online#300.cn邮箱联系删除。

相关文章