时间:2021-05-19
Linux 中ip forward功能是一个比较方便实用的功能,只需要简单配置,添加几条路由,即可实现ip转发。本文基于CentOS 7下采取一台机器充当虚拟路由,来实现Windows环境与Linux环境中相互通信。具体见下文,供大家参考。
一、环境及需求说明
本地测试环境,由于Win7+VMware这台机器网卡太新,无法被VMware EXSi识别,无奈之下就直接装了个Win7,然后再上面基于Vmware workstation 12开启了一些临时测试的虚拟机。其次本地直连网段192.168.1.0 IP有限,而又希望直接从本机(如图Win10) ssh连接到这些虚拟机,因此考虑使用Linux的ip转发功能来实现。
上述图片中已经列出了各个节点的IP信息,红色的虚拟机充当软路由,配置好之后,实现Win10 直接ssh到虚拟机。
二、虚拟路由服务器配置
###查看网卡信息[root@centos7-router ~]# ip addr1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: eno16777728: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:9c:eb:2d brd ff:ff:ff:ff:ff:ff inet 172.24.8.254/24 brd 172.24.8.255 scope global eno16777728 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fe9c:eb2d/64 scope link valid_lft forever preferred_lft forever3: eno33554960: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:9c:eb:37 brd ff:ff:ff:ff:ff:ff inet 192.168.1.175/24 brd 192.168.1.255 scope global dynamic eno33554960 valid_lft 82384sec preferred_lft 82384sec inet6 fe80::20c:29ff:fe9c:eb37/64 scope link valid_lft forever preferred_lft forever###查看路由表[root@centos7-router ~]# route -nKernel IP routing table ###缺省情况下,每块网卡都有一个基于本网段的路由记录Destination Gateway Genmask Flags Metric Ref Use Iface0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eno33554960172.24.8.0 0.0.0.0 255.255.255.0 U 100 0 0 eno16777728192.168.1.0 0.0.0.0 255.255.255.0 U 100 0 0 eno33554960###使用ip命令方式查看路由[root@centos7-router ~]# ip route listdefault via 192.168.1.1 dev eno33554960 proto static metric 100 172.24.8.0/24 dev eno16777728 proto kernel scope link src 172.24.8.254 metric 100 192.168.1.0/24 dev eno33554960 proto kernel scope link src 192.168.1.175 metric 100 ###开启ip forward[root@centos7-router ~]# cp /usr/lib/sysctl.d/50-default.conf /usr/lib/sysctl.d/50-default.conf.bk[root@centos7-router ~]# echo "net.ipv4.ip_forward = 1" >>/usr/lib/sysctl.d/50-default.conf[root@centos7-router ~]# grep ip_forward /usr/lib/sysctl.d/50-default.confnet.ipv4.ip_forward = 1[root@centos7-router ~]# sysctl -p ###如不生效重启一下OS三、CentOS7-a主机下添加路由
###查看当前主机ip 信息[root@centos7-a ~]# ip addr list1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: eno16777728: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:57:26:9d brd ff:ff:ff:ff:ff:ff inet 172.24.8.131/24 brd 172.24.8.255 scope global dynamic eno16777728 valid_lft 1088sec preferred_lft 1088sec inet6 fe80::20c:29ff:fe57:269d/64 scope link valid_lft forever preferred_lft forever###查看当前主机路由信息 [root@centos7-a ~]# ip route list172.24.8.0/24 dev eno16777728 proto kernel scope link src 172.24.8.131 metric 100 [root@centos7-a ~]# # Author : Leshami[root@centos7-a ~]# # Blog : http://blog.csdn.net/leshami[root@centos7-a ~]# ip route add default via 172.24.8.254[root@centos7-a ~]# ip route listdefault via 172.24.8.254 dev eno16777728 172.24.8.0/24 dev eno16777728 proto kernel scope link src 172.24.8.131 metric 100 ###测试到虚拟路由器网关ip连通性[root@centos7-a ~]# ping 172.24.8.254 -c 2 PING 172.24.8.254 (172.24.8.254) 56(84) bytes of data.64 bytes from 172.24.8.254: icmp_seq=1 ttl=64 time=0.268 ms64 bytes from 172.24.8.254: icmp_seq=2 ttl=64 time=0.302 ms--- 172.24.8.254 ping statistics ---2 packets transmitted, 2 received, 0% packet loss, time 1000msrtt min/avg/max/mdev = 0.268/0.285/0.302/0.017 ms###测试到虚拟路由器ip连通性[root@centos7-a ~]# ping 192.168.1.175 -c 2PING 192.168.1.175 (192.168.1.175) 56(84) bytes of data.64 bytes from 192.168.1.175: icmp_seq=1 ttl=64 time=0.475 ms64 bytes from 192.168.1.175: icmp_seq=2 ttl=64 time=0.443 ms--- 192.168.1.175 ping statistics ---2 packets transmitted, 2 received, 0% packet loss, time 1000msrtt min/avg/max/mdev = 0.443/0.459/0.475/0.016 ms四、Windows 10下配置路由
###当前环境C:\>systeminfo | findstr BuildOS Version: 10.0.14393 N/A Build 14393OS Build Type: Multiprocessor Free###查看当前的路由信息C:\>route print -4===========================================================================Interface List 7...54 ab 3a xx b8 ea ......Intel(R) Ethernet Connection I219-V21...ac 2b 6e 5f 3b 57 ......Microsoft Wi-Fi Direct Virtual Adapter ......===========================================================================IPv4 Route Table===========================================================================Active Routes:Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.242 35 127.0.0.0 255.0.0.0 On-link 127.0.0.1 331 127.0.0.1 255.255.255.255 On-link 127.0.0.1 331 127.255.255.255 255.255.255.255 On-link 127.0.0.1 331 172.24.10.0 255.255.255.0 On-link 172.24.10.1 291 172.24.10.1 255.255.255.255 On-link 172.24.10.1 291 172.24.10.255 255.255.255.255 On-link 172.24.10.1 291 192.168.1.0 255.255.255.0 On-link 192.168.1.242 291 192.168.1.242 255.255.255.255 On-link 192.168.1.242 291 192.168.1.255 255.255.255.255 On-link 192.168.1.242 291 192.168.16.0 255.255.255.0 On-link 192.168.16.1 291 192.168.16.1 255.255.255.255 On-link 192.168.16.1 291 192.168.16.255 255.255.255.255 On-link 192.168.16.1 291 224.0.0.0 240.0.0.0 On-link 127.0.0.1 331 224.0.0.0 240.0.0.0 On-link 192.168.1.242 291 224.0.0.0 240.0.0.0 On-link 192.168.16.1 291 224.0.0.0 240.0.0.0 On-link 172.24.10.1 291 255.255.255.255 255.255.255.255 On-link 127.0.0.1 331 255.255.255.255 255.255.255.255 On-link 192.168.1.242 291 255.255.255.255 255.255.255.255 On-link 192.168.16.1 291 255.255.255.255 255.255.255.255 On-link 172.24.10.1 291===========================================================================Persistent Routes: None###添加持久化路由 C:\>route add 172.24.8.0 mask 255.255.255.0 192.168.1.175 -pOK!C:\>route print -4IPv4 Route Table===========================================================================Active Routes:Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.242 35 127.0.0.0 255.0.0.0 On-link 127.0.0.1 331 127.0.0.1 255.255.255.255 On-link 127.0.0.1 331 127.255.255.255 255.255.255.255 On-link 127.0.0.1 331 172.24.8.0 255.255.255.0 192.168.1.175 192.168.1.242 36 172.24.10.0 255.255.255.0 On-link 172.24.10.1 291 172.24.10.1 255.255.255.255 On-link 172.24.10.1 291 172.24.10.255 255.255.255.255 On-link 172.24.10.1 291 192.168.1.0 255.255.255.0 On-link 192.168.1.242 291 192.168.1.242 255.255.255.255 On-link 192.168.1.242 291 192.168.1.255 255.255.255.255 On-link 192.168.1.242 291 192.168.16.0 255.255.255.0 On-link 192.168.16.1 291 192.168.16.1 255.255.255.255 On-link 192.168.16.1 291 192.168.16.255 255.255.255.255 On-link 192.168.16.1 291 224.0.0.0 240.0.0.0 On-link 127.0.0.1 331 224.0.0.0 240.0.0.0 On-link 192.168.1.242 291 224.0.0.0 240.0.0.0 On-link 192.168.16.1 291 224.0.0.0 240.0.0.0 On-link 172.24.10.1 291 255.255.255.255 255.255.255.255 On-link 127.0.0.1 331 255.255.255.255 255.255.255.255 On-link 192.168.1.242 291 255.255.255.255 255.255.255.255 On-link 192.168.16.1 291 255.255.255.255 255.255.255.255 On-link 172.24.10.1 291===========================================================================Persistent Routes: ###以下为添加的持久化路由记录 Network Address Netmask Gateway Address Metric 172.24.8.0 255.255.255.0 192.168.1.175 1 ===========================================================================五、验证两边连通性
###从Linux端ping windows 10[root@centos7-a ~]# ping 192.168.1.242 -c 2 PING 192.168.1.242 (192.168.1.242) 56(84) bytes of data.64 bytes from 192.168.1.242: icmp_seq=1 ttl=63 time=1.70 ms64 bytes from 192.168.1.242: icmp_seq=2 ttl=63 time=1.10 ms--- 192.168.1.242 ping statistics ---2 packets transmitted, 2 received, 0% packet loss, time 1002msrtt min/avg/max/mdev = 1.101/1.404/1.707/0.303 ms###从windows 10端ping LinuxC:\>ping 172.24.8.131 -tPinging 172.24.8.131 with 32 bytes of data:Reply from 172.24.8.131: bytes=32 time=1ms TTL=63Reply from 172.24.8.131: bytes=32 time=1ms TTL=63注,如果测试有问题,请考虑是否被防火墙拦住。
以上就是本文的全部内容,希望对大家的学习有所帮助,也希望大家多多支持。
声明:本页内容来源网络,仅供用户参考;我单位不保证亦不表示资料全面及准确无误,也不保证亦不表示这些资料为最新信息,如因任何原因,本网内容或者用户因倚赖本网内容造成任何损失或损害,我单位将不会负任何法律责任。如涉及版权问题,请提交至online#300.cn邮箱联系删除。
CentOS最近几天才刚刚更新到CentOS7,所以有不少用户不知道怎么对CentOS7进行安装和配置,特别是CentOS7的主机名和IP等相关网络配置跟之
目录安装CentOS7配置静态IP通过vi编辑该文件安装centos7这里我们要安装centos764位,所以选择centos764位配置我们点击存储后,vmw
一、CentOS7和CentOS8网络配置区别:VMwareWorkstation15Pro中安装了CentOS8.0.1905,但在配置IP地址过程中发现没有
这里之所以是查看下IP,是我们后面要建一个Centos远程工具Xshell连接Centos的时候,需要IP地址,所以我们这里先学会查看虚拟机里的Centos7的
所谓的VRRP是一种选择协议,它可以把一个虚拟路由器的责任动态分配到局域网上的VRRP路由器中的一台,通过设定一个IP作为默认路由器,虚拟IP地址在路由器间